You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
20 lines
905 B
Markdown
20 lines
905 B
Markdown
# ESP8266
|
|
|
|
* [Reference](https://randomnerdtutorials.com/esp8266-pinout-reference-gpios/)
|
|
* 
|
|
* Best Pins to Use
|
|
|
|
Label | GPIO | Input | Output | Notes
|
|
---|----|----|----|----|----
|
|
D0 | GPIO16 | no interrupt | no PWM or I2C support | HIGH at boot used to wake up from deep sleep
|
|
D1 | GPIO5 | OK | OK | often used as SCL (I2C)
|
|
D2 | GPIO4 | OK | OK | often used as SDA (I2C)
|
|
D3 | GPIO0 | pulled up | OK | connected to FLASH button, boot fails if pulled LOW
|
|
D4 | GPIO2 | pulled up | OK | HIGH at boot connected to on-board LED, boot fails if pulled LOW
|
|
D5 | GPIO14 | OK | OK | SPI (SCLK)
|
|
D6 | GPIO12 | OK | OK | SPI (MISO)
|
|
D7 | GPIO13 | OK | OK | SPI (MOSI)
|
|
D8 | GPIO15 | pulled to GND | OK | SPI (CS) Boot fails if pulled HIGH
|
|
RX | GPIO3 | OK | RX pin | HIGH at boot
|
|
TX | GPIO1 | TX pin | OK | HIGH at boot debug output at boot, boot fails if pulled LOW
|
|
A0 | ADC0 | Analog Input | X |