#if !defined SGMANAGER_H
#define SGMANAGER_H

#include "stdafx.h"
#include "SocketSecsGem.h"

#ifdef SECSGEM_EXPORTS
#define SECSGEM_DLL __declspec(dllexport)
#else
#define SECSGEM_DLL __declspec(dllimport)
#endif

#define MAXSOCKBUF	4096
#define	SG_END_TERMINATOR	'\n'


#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000
// SGManager.h : header file
//
/////////////////////////////////////////////////////////////////////////////
// CSGManager document

class CSocketSecsGem;

/*************************************************************************************/
class SECSGEM_DLL CSGManager
{
public:
	CSGManager();     
	virtual ~CSGManager();

	CMutex RemoteCmdMutex;
	CEvent m_RmtEvent;
	CSingleLock *rmtlock;

protected: //public:
	/******************************* To Hanlder Info ***********************/
	int m_iEnableForAllMode;//phyu 01Aug2011
	CString	m_sControlState;
	CString	m_sLinkState;
	CString	m_sSpoolState;
	CString m_sWaferMapDownloaded;
	CString m_sStripMapDownloaded;
	CString m_sWaferMapUploaded;
	CString m_sRecipeDownloaded;
	CString m_sRecipeUploaded;
	CString m_sRecipeDeleted;
	CString m_sAddedRecipe;
	CString m_sDatasetUploaded;
	CString m_sDatasetDownloaded;
	CString m_sRemoteCmdReceived;
	CString m_sNumberOfRecipe;
	CString m_sNthRecipe;
	CString m_sE10State;
	CString m_sGeneralCmdReceived;

	unsigned int iRecipeNumber;

	CString m_sPendingReadMsg;
	
	HWND gHwnd;	

	CString m_sSecsGemDataFile;

public:
	void	WriteToLogFile(CString sMsg);

public:
	void EnableEventForAllMode();//phyu 11Aug2011
	void DisableEventForAllMode();//phyu 11Aug2011 //Note: Event Enable in PRODUCTION Mode
    CString GetControlState();//phyu 01Aug2011
	CString GetLinkState();//phyu 01Aug2011
	bool IsOnlineRemote();//phyu 11Aug2011
	bool IsEnableCommunicating();//phyu 11Aug2011
	bool IsOnlineLocal();//phyu 11Aug2011
	bool IsSpoolActive();//phyu 11Aug2011
	/*********** Newly added for receiving message on 21/04/2008 **********/
	bool IsConnectWithSecsGem(); //check for connection between handler and Ti secs gem
	/*********** Newly added for receiving message on 1/11/2007 **********/
	bool m_bDataComplete;
	char m_cReceiveData[MAXSOCKBUF];
	char m_RcvBuff[MAXSOCKBUF];
	long m_nBufferPtr;
	void ReceiveComm( const char *cpcBuffer, int nSize);
	void OnReceive( int nErrorCode );
	void ResetReceiveBuffer();
	/**********************************************************************/
	//	LPTSTR psMsg;
protected:
	/******************************* To Hanlder info ***********************/
	CString m_strSecsGemConnection;
	CString m_sSGMainMode;
	CString m_sSGLoginUser;
	CString m_sMachineState;
	bool m_bIsSecsGemEnabled;

	PROCESS_INFORMATION g_pi;
	/**********************************************************************/
	/********************************* SecsGem Socket **********************/
	int		m_nSGPort;
	char	m_szSGIpAddress[128];
	int		SendMsgToSecsGem( CString pStr );
	bool	static SkipToNextData( char **ppStr);
	CString GetNextData(char **ppStr);
	CSocketSecsGem* m_pSocketSecsGem;
	/**********************************************************************/
	int		m_NumberOfDay;//phyu 4Jan2010
	bool    m_bLogEnable;//Phyu 4Jan2010
	/**********************************************************************/
public:	
	/************** Handler Calling Functions *****************************/
	int	SendToSecsGem(const void* lpBuf, int nBufLen, int nFlags) ;

	bool ConnectSocketSecsGem();	// To make connection with Independent Secs/Gem
	bool DisconnectSocketSecsGem(); // To disconnect Secs/Gem application

	//Secsgem Application Function
	void SetEnableLogFile( bool bEnable = true);//Phyu 04Jan2011
	void SetNumberOfDaysKeepInMemoryForLogFile( int nDays = 30);//Phyu 04Jan2011
	bool SetSecsGemIpAddressAndPort( HWND Hwnd, int iPort, char strIpAddress[128], bool bConnect = false );
	bool StartAndConnectSecsGemApplication( HWND Hwnd); // To Start Secs/Gem application and connect
	bool CloseSecsGemApplication();	// To close secsgem application
	bool StartSecsGemApplication();	// To start Secsgem application
	void DeleteOldSGLogFile( CString m_pLogFilePathOnly);//phyu 4Jan2010

	//SecsGem Status Function
	bool GoOnLine();				// To switch to SecsGem Online mode
	bool GoOffline();				// To switch to SecsGem Offline mode
	bool GoRemote();				// To switch to Online/Remote control state
	bool GoLocal();					// To switch to Online/Local control state
	bool SecsGemDisableLink();		// To disable SecsGem Link
	bool SecsGemEnableLink();		// To enable Secsgem Link
	bool SetMainMode( CString sMode );	// To set Main Mode
	bool SetUserLevel( CString sUserLevel );	//To set User level
	bool SetProcessState(CString sProcessState );	//To set process state
	bool UpdateCurrentParameters();		// To send current mainmode, user and process state to secsgem appln

	//Send Event Function
	bool SendEvent( unsigned int iEventID);// To send Event,iEventReply:0= No need to Watit Event Reply

	//Update Variable Function
	bool SetVariableValue( UINT iVariableID, UINT iFormat, int iValue );	//To set  Integer Variable value
	bool SetVariableValue( UINT iVariableID, UINT iFormat, long iValue );	//To set Long variable value
	bool SetVariableValue( UINT iVariableID, UINT iFormat, CString iValue );// To set string variable value
	bool SetVariableValue( UINT iVariableID, UINT iFormat, double iValue ); // To set floating point variable value

	//Alarm Function
	bool SendAlarmOn( UINT iAlarmID, CString sAlarmText);	// To send Alarm On
	bool SendAlarmOff( UINT iAlarmID, CString sAlarmText);	// To send Alarm Off
	bool ClearAllAlarms();						// To clear all alarms

	//Data Set Function
	bool UploadData( CString strName );			// To Upload Data
	bool DownloadData( CString strName );		// To download data
	bool ResetData();							// To reset data

	// Wafer map Function
	bool DownloadWaferMap( CString sWMapID, int nType = 2, int nFormat=1, int nFNLoc=0, int nRotAngle=0, int nOrgLoc=0, CString strBinCodeEq="", CString strNullBinCodeEq=""  );
	bool UploadWaferMap( CString strName );		// To Upload Wafer Map
	bool DownloadStripMap( CString strName );	// To download strip Map

	bool DisplayTerminalMsgDialog();			// To display terminal message
	void UnlockRemoteCommand();					// To unlock remote command
	bool AcknowledgeRemoteCommand( CString sRmtCmd, int iReturnVal );					// To acknowledge remote command


	//Process Program Management(Recipe)
	bool DownloadRecipe( CString strName );		// To download recipe
	bool UploadRecipe( CString strName );		// To Upload recipe
//	bool AddRecipe( CString strName );			// To Add Recipe //Phyu 30Oct2009
	bool UpdateRecipeList();					// To update recipe list

	//***************************************************************
	// Verify recipe after download recipe, then send S7F27 for PASS or FAIL
	//strResultData = "PASS": successful load recipe
	//strResultData = "FAIL": Fail to load recipe
	//Note:Do not use this function unless customer request
	//***************************************************************
	bool SendRecipeVerification( CString strResultData );// reply to host

	//***************************************************************
	// To Add Recipe
	// bRefreshRecipe = true  :Not Send GemPPChangeEvent to host
	// bRefreshRecipe = false :Send GemPPChangeEvent with PPCHANGESTATUS(Created) to host
	//***************************************************************
	bool AddRecipe( CString strName,bool bRefreshRecipe = false  );		 //Phyu 30Oct2009
								
	//***************************************************************
	//	After delete Recipe file at C:\\PPDER and D:\\PPDER,
	//  then send GemPPChangeEvent with PPCHANGESTATUS(Deleted) to host.
	//****************************************************************
	bool DeleteRecipe( CString strName );		// To delete Recipe

	//Phyu 30Oct2009
	//***************************************************************
	// bRefreshRecipe = true  :Delete all recipe at C:\\PPDIR only
	// bRefreshRecipe = false :Delete all recipe at C:\\PPDIR and D:\\PPDIR
	//***************************************************************
	bool DeleteAllRecipe(bool bRefreshRecipe = false);//Phyu 30 Oct 2009

	//***************************************************************
	//	Send GemPPChangeEvent with PPCHANGESTATUS(Changed) to host.
	//  After edit recipe, need to call this function to inform to host.		
	//****************************************************************
	bool EditRecipe(CString strName);	//Phyu 30 Oct 2009				 										  

	//***************************************************************
	//	Send EPT Module Data to host.//04Jan2009
	//****************************************************************
	bool SendEPTData(int nModuleID,CString strTaskName,int nTaskType, int nEPTState, int nBlockedReson, CString strBlockedReasonText);
public:
	void OnReceivedControlState ( CString m_sControlState );	// This function is called when Control State change is received
	void OnReceivedLinkState ( CString m_sLinkState );			// This function is called when Link State change is received
	void OnReceivedSpoolState ( CString m_sSpoolState );		// This function is called when Spool State change is received
	void OnWaferMapDownloaded( CString m_sWaferMapDownloaded );	// This function is called when Wafer Map downloaded
	void OnStripMapDownloaded( CString m_sStripMapDownloaded );	// This function is called when Strip Map downloaded
	void OnWaferMapUploaded( CString m_sWaferMapUploaded );		// This function is called when Wafer Map Uploaded
	void OnRecipeDownloaded( CString m_sRecipeDownloaded );		// This function is called when Recipe is downloaded from Host
	void OnRecipeUploaded( CString m_sRecipeUploaded );			// This function is called when Recipe is uploaded.
	void OnRecipeDeleted( CString m_sRecipeDeleted );			// This function is called when Recipe is deleted.
	void OnRecipeAdded( CString m_sAddedRecipe );				// This function is called when Recipe is added
	void OnDatasetUploaded( CString m_sDatasetUploaded );		// This function is called when Data Set uploaded
	void OnDatasetDownloaded( CString m_sDatasetDownloaded );	// This function is called when Dataset downloaded from Host
//	void OnRemoteCommandReceived( CString m_sRemoteCmdReceived);// This function is called when a Remote command is received
	void OnRemoteCommandReceived( CString m_sRemoteCmdReceived, int nReply = 0);// This function is called when a Remote command is received
	void OnRecipeUpdateNumberOfRecipe( CString m_sNumberOfRecipe ); // This function is called when Number recipe received
	void OnRecipeUpdateNthRecipe( unsigned int iRecipeNumber, CString m_sNthRecipe ); // This function is called to updated Nth Recipe
	void OnRecipeUpdatedList();										// This function is called when updated Recipe List.
	void OnReceivedPendingMessage( CString m_sPendingReadMsg );		// This function is called whenever message received
	void OnReceivedE10State( CString m_sE10State );					// This function is called when E10 State change is received

	void SetSecsGemDataFileFolder(CString m_sSGDataFileFolder);		//Write secs gem data to this file
	void OnAllRecipeDeleted( CString m_sRecipeDeleted );
	void OnRecipeEdited(CString m_sRecipeEdited);
	void OnECChanged( CString sECID, CString sECData ); //Thi function is call when host change ECID value.
};
#endif // !defined(AFX_SGMANAGER_H__3247996A_39A5_48E2_B94A_27CC7247F08C__INCLUDED_)