diff --git a/Sample.bs2 b/Sample.bs2
new file mode 100644
index 0000000..bbc9d0c
--- /dev/null
+++ b/Sample.bs2
@@ -0,0 +1,72 @@
+' {$STAMP BS2}
+' {$PBASIC 2.5}
+
+Spkr PIN 10
+' DTMF output on pin 10
+#SELECT $STAMP
+  #CASE BS2, BS2E
+   TmAdj CON $100 ' x 1.0 (time adjust)
+   FrAdj CON $100 ' x 1.0 (freq adjust)
+  #CASE BS2SX
+   TmAdj CON $280 ' x 2.5
+   FrAdj CON $066 ' x 0.4
+  #CASE BS2P
+   TmAdj CON $3C5 ' x 3.77
+   FrAdj CON $044 ' x 0.265
+  #CASE BS2PE
+   TmAdj CON $100 ' x 1.0
+   FrAdj CON $0A9 ' x 0.662
+  #CASE BS2PX
+   TmAdj CON $607 ' x 6.03
+   FrAdj CON $2A ' x 0.166
+#ENDSELECT
+
+eeLoc VAR Byte ' EEPROM address of stored number
+eeByte VAR Byte ' Byte containing two DTMF digits
+dtDig VAR eeByte.NIB1 ' Digit to dial
+phone VAR Nib ' Pick a phone #
+hiLo VAR Bit ' Bit to select upper and lower nib
+
+cntA VAR Byte
+repeatA VAR Byte
+
+Parallax DATA $19,$16,$62,$48,$33,$3F ' Phone: 1-916-624-8333
+ParallaxFax DATA $19,$16,$62,$48,$00,$3F ' Phone: 1-916-624-8003
+Information DATA $15,$20,$55,$51,$21,$2F ' Phone: 1-520-555-1212
+
+Main:
+  'FOR phone = 0 TO 2
+     ' retrieve address
+  '   LOOKUP phone, [Parallax, ParallaxFax, Information], eeLoc
+  '   GOSUB Dial_Number
+  '   PAUSE 2000
+  'NEXT
+  GOSUB Buzzer
+END
+
+Dial_Number:
+  DO
+    READ eeLoc, eeByte ' Retrieve byte from EEPROM
+    eeLoc = eeLoc + 1 ' point to next pair of digits
+    FOR hiLo = 0 TO 1 ' Dial upper and lower digits
+      IF (dtDig = $F) THEN EXIT ' Hex $F is end-of-number flag
+        DTMFOUT Spkr, ' dial digit
+               150 */ TmAdj, 25, [dtDig] ' 150 ms on, 25 ms off
+         eeByte = eeByte << 4 ' Shift in next digit
+      NEXT
+  LOOP UNTIL (dtDig = $F)
+  RETURN
+
+ Buzzer:
+  FOR repeatA = 0 TO 5
+   PAUSE 20000
+   OUTPUT 10
+   FOR cntA = 0 TO 10
+    OUT10=1
+    PAUSE 300
+    OUT10=0
+    PAUSE 1000
+   NEXT
+  NEXT
+
+  RETURN
\ No newline at end of file